Wav link setup is not a formidable process for those users who know how they can proceed with the configuration. By reading the further given section of this article you will be able to know how you can configure wav link devices. Further in this article we also specify how you can install the device hardware appropriately so that you cannot face trouble while configuring. We breakdown the process in simple manners so even a person who is new to networking can understand the device hardware installation and configuration easily.
Installation Of Hardware
Hardware installation is the primary step of the wav link setup. The installation of hardware includes following steps which you can follow to add the device in your network system:
- You have to start the procedure by searching a place where you can put your router or range expander device. If you are going to configure a router device then you should place it closer to the modem device. The placement of the range Extender device should be within the range of the router device so it can easily get connected.
- After the placement is confirmed you have to proceed with the connection between the modem device and the router device if you are going to configure a router. Use an ethernet cable to connect the router device with the modem device. Secure the connection and proceed ahead in the process.
- Now it's time to start the device whether you are configuring a range extender or a router. Connect your device with the power source using the power adapter. Turn on the power supply and wait for the device to start.
- When the device LED light displays a solid stable life then you can proceed with the configuration.
Configuration Of Settings
Hardware installation is very important to be done accurately. You should follow the instructions specified above to install the hardware and only then proceed with the configuration step specified here:
- Configuration part of the wav link setup process initiates with the selection of a client device. You can use a computer, a laptop or a smartphone for the configuration.
- Next step of the procedure is to access the setup page and for that you have to launch a web browser. You can use a Google Chrome or a Mozilla Firefox or Safari or any other similar browser to access the page but make sure the version you are using of the browser is the latest one.
- Afterwards you have to specify the web address or IP address in the URL bar of the browser and click on enter button to open the page.
- When the setup page is displayed on the screen you need to get access to the admin panel by specifying the login credentials. You can use the default login credentials which are admin for the username and password for the password.
- Next you have to click on the login button and you will get access to the admin panel from where you can easily complete the device settings.
- First you have to configure the device by connecting it with the internet. Afterwards you have to change the default network details and the admin details.
- Thereafter you have to make the advanced configuration settings as per your requirement and save all the changes you have done.
- Don't forget to review the changes you have made prior to clicking the submit button. Wait for your device to apply the changes while it may reboot itself.
- Afterwards you have to perform a test to check the network speed and coverage. For the test you can use a smartphone device and connect it with the newly created wireless network. Then play an online video on your device and move around your space to check the coverage and speed.
Conclusion
From the crux of the above description I would like to compute my word by saying that the Wav link setup specified above is simple and easy to follow. By following the instructions you can configure the router or range Extender device very quickly without taking any technical help. But still if you are experienced in any problem then you should communicate with experts.
Tags : .....
